350Z NXT2

350Z NXT2 Excavator


The 350Z NXT2 zero-tail-swing compact excavator is both strong and maneuverable and includes cost saving systems designed to have a positive impact on your bottom line. Attachments can be changed quickly with minimal effort with the POWER-A-TACH® system. The operator only leaves the seat to engage and disengage the safety pin. NEW for this excavator, Digital Operator Interface located in a highly visible area with backlit display. This display reads hours and clock, recordable maintenance history with adjustable time intervals and reminders, multiple language selections, records hours used for past 90 days and can be monitored without starting the engine.
Key Features
  • Yanmar Tier IV emissions certified 24.4 hp diesel engine provides 20% less fuel consumption and an electronic throttle for precise control.
  • ECO mode and auto deceleration improve fuel economy, decrease noise and lower emission levels by reducing engine speed when not necessary.
  • Proportional controls for auxiliary hydraulics provide smooth hydraulic control for accurate, precise attachment performance.
  • Larger cab features state-of-the-art controls, digital interface display and excellent visibility. Optional fully-enclosed cab further enhances operator comfort.
  • Two large rear doors, a swing-open side access panel, and removable covers beneath the operator’s seat provide ample service access.
  • Attachments can be changed quickly with minimal effort. The operator only leaves the seat to engage and disengage the safety pin.
Specifications
350Z NXT2
ROPS/OPG
Type of ROPS / FOPS
Canopy / Cab
Tracks
Type of tracks
Rubber
Engine
Model
Yanmar 3TNV88F-ESBV Tier IV
Output - Gross
24.4 hp @ 2500 rpm
Output - Net
23.9 hp @ 2500 rpm
Displacement
100.2 cu. In.
Dimensions
Overall length (transport)
15 feet 8 inches
Overall height (transport)
Canopy/Cab 8 feet 1 inch
Overall width
5 feet 8.5 inches
Minimum Ground Clearance
12.6 inches
Hydraulic System
Pump capacity
2 variable / 2 Gear
Auxiliary hydraulic flow
29.3 gpm
Max. breakout force
- Bucket
5,643 lbs.
- Arm
4,226 lbs.
Drive System
Travel Speed
1.7 / 2.8 mph
Max. traction force
n/a
Tumbler distance
n/a
Crawler length
5 feet 8.8 inches
Shoe width
n/a
Ground contact pressure
5.0 / 4.8 psi
Swing System
Unit swing speed
n/a
Boom swing angle
- Left
43°
- Right
65°
Blade
Dimensions
- Width
5 feet 8.5 inches
- Height
14.6 inches
Max. lift above ground
n/a
Max. drop below ground
13.6 inches
Fluid Capacities
Hydraulic oil (reservoir)
10.6 gal
Fuel reservoir
10.8 gal
Operating Weight
Operating weight
7,905 / 8,214 lbs.
Additional Excavators
Posted in Mustang Zero-Tail-Swing