M62 Tractor Loader Backhoe
Kubota’s largest TLB was engineered to save you time and effort on every job. Packed full of upgraded features, the M62 comes equipped with a 63 HP Kubota Tier 4 Final diesel engine, Kubota front loader with 3,960 lbs. of lift capacity and powerful Kubota backhoe with 169.8 in. max digging depth. It’s one powerful combination ideal for a wide range of landscaping, construction and contracting jobs.
Key Features
- 63.0hp Kubota diesel engine.
- HST Plus transmission sensing heavy loads.
- Backhoe Crawling Mode allows “creep” while at backhoe.
- Slant Nose Hood.
- Generous step-through deck.
- IntelliPanel™ control center.
- Rear 3-Point Hitch option.
- Independent PTO.
Gallery
Specifications
M62 | |
![]() | |
Engine | Gross power (SAE)
63.0 HP
Net power (SAE)
59.1 HP
Total displacement
148.5 cu. In
No. of cylinders
4
Rated speeds
2700 rpm |
Transmission | Type
HST Plus
No. of speeds
Infinite
Max. traveling speed
15.5 mph
Range shift lever position
Seat side, right |
Hydraulic System | Pump capacity*1
30.9 gpm
3-point hitch lift capacity at 24 in. behind lift
point
2796 lbs.
Position Control
Standard |
Tractor Specifications | Max. PTO Power
46 HP
Fuel Tank Capacity
17.7 gal
Tire Size
Front
10 x 16.50 - R4
Rear
17.5L - 24 R4
Wheelbase
80.7 in
Tread
Front
56.7 in
Rear
57.6 in
Weight with Loader, Backhoe and
ROPS/FOPS*2
8925 lbs.
Min. Turning Radius (w/ brake)
10.8 ft.
Rear PTO
Independent, 540 rpm
Clutch
Dry, Single
Power Steering
Hydrostatic
Brake Type
Wet disc
3-Point Hitch (Category I & II)
Optional
ROPS
4-post, Standard
FOPS
Standard |
Others | Loader-integrated reinforced frame
Standard
Reversible Seat
Standard
Tilt Steering
Standard
Muffler
Enclosed
Pedals
Hanging type
Deck
Walk-through deck
Glow Plug
Super glow |
Loader Specifications | Lift capacity to max. height at pivot pin
3960 lbs.
Breakout force at pivot pin
5992 lbs.
Control valve
One detent float position power beyond circuit
hydraulic dual self-leveling valve
Net weight (Approx.)
1169 lbs.
Auto-leveling mechanism
Standard, Hydraulic
Operating Dimensions
Maximum lift height to pivot pin
126.1 in
Clearance with bucket dumped
95.0 in
Reach at maximum height
24.1 in
Maximum dump angle
43 deg
Reach with bucket on ground
71.7 in
Bucket rollback angle
45 deg
Digging depth
2.7 in
Overall height in carrying position
63.0 in
Performance Rating (no load)
Raise to full height (self-leveling on)
4.2 sec
Raise to full height (self-leveling off)
3.9 sec
Lowering time self level valve (self-leveling on)
4.3 sec
Lowering time self level valve (self-leveling off)
3.1 sec
Attachment rollback time (self-leveling on)
2.4 sec
Attachment rollback time (self-leveling off)
2.4 sec
Attachment dumping time (self-leveling on)
2.4 sec
Attachment dumping time (self-leveling off)
2.4 sec |
Backhoe Specifications | Digging force using bucket cylinder (approx.)
6572 lbs.
Digging force using dipperstick cylinder (approx.)
4657 lbs.
Trunnion type boom swing mechanism
Two cylinders - 2160 lbs.
Operating Dimensions
Transport height
136.0 in
Stabilizer spread-transport
67.2 in
Ground clearance
13.8 in
Overall width
75.0 in
Digging depth, maximum
169.8 in
Digging depth, 2ft. Flat bottom
168.4 in
Digging depth, 8ft. Flat bottom
154.7 in
Operating height, fully raised
202.9 in
Loading height
130.9 in
Loading reach
82.0 in
Reach from swing pivot
211.1 in
Swing pivot to rear axle center line
39.7 in
Bucket rotation
180 deg
Swing arc
180 deg
Stabilizer spread-operating
89.3 in
Angle of departure per SAE J1234
20.4 deg
Leveling angle
10.0 deg
*1 11.8 GPM for
loader/backhoe, 6.6 GPM for backhoe boom swing, 6.6 GPM for power steering.
*2 With round back loader
bucket, 18" backhoe and standard tires.
* The specifications are taken with KUBOTA's M62
tractor. (Tire size: Front 27 x 10.50 - 15R4, Rear 15 - 19.5R4) |