L45

L45 Tractor Loader Backhoe


The L45 Tractor Loader Backhoe delivers dependability, durability and responsibility. The 45-hp Kubota engine runs cleaner and starts quickly in cold weather. The front wheel drive bevel gear assures that you always get a smooth and full power transfer with the 4-wheel drive. And the HST Plus transmission has load sensing ability controlling the pump and motor.
Key Features
  • 45hp Kubota diesel engine.
  • HST Plus transmission sensing heavy loads.
  • Backhoe Crawling Mode allows “creep” while at backhoe.
  • Slant Nose Hood.
  • Generous step-through deck.
  • IntelliPanel™ control center.
  • Rear 3-Point Hitch option.
  • Independent PTO.
Specifications
L45
Engine
Gross power (SAE)
45 HP
Net power (SAE)
42.5 HP
Total displacement
134.1 cu. In
No. of cylinders
4
Rated speeds
2700 rpm
Transmission
Type
HST Plus
No. of speeds
Infinite
Max. traveling speed
14.9 mph
Range shift lever position
Seat side, right
Hydraulic System
Pump capacity*1
25.0 gpm
3-point hitch lift capacity at 24 in. behind lift point
2756 lbs.
Position Control
Standard
Tractor Specifications
Max. PTO Power
32 HP
Fuel Tank Capacity
11.9 gal
Tire Size
Front
27 x 10.50 - 15R4
Rear
15 - 19.5R4
Wheelbase
72.5 in
Tread
Front
45.9 in
Rear
56.1 in
Weight with Loader, Backhoe and ROPS/FOPS*2
7173 lbs.
Min. Turning Radius (w/ brake)
11.2 ft.
Rear PTO
Independent, 540 rpm
Clutch
Dry, Single
Power Steering
Hydrostatic
Brake Type
Wet disc
3-Point Hitch (Category I & II)
Optional
ROPS
4-post, Standard
FOPS
Standard
Others
Loader-integrated reinforced frame
Standard
Reversible Seat
Standard
Tilt Steering
Standard
Muffler
Enclosed
Pedals
Hanging type
Deck
Walk-through deck
Glow Plug
Super glow
Loader Specifications
Lift capacity to max. height of bucket bottom mid point
2200 lbs.
Lift capacity to max. height at pivot pin
2848 lbs.
Breakout force at pivot pin
4530 lbs.
Control valve
One detent float position power beyond circuit hydraulic dual self-leveling valve
Net weight (Approx.)
1040 lbs.
Auto-leveling mechanism
Standard, Hydraulic
Operating Dimensions
Maximum lift height to pivot pin
113.9 in
Clearance with bucket dumped
90.0 in
Reach at maximum height
16.8 in
Maximum dump angle
44 deg
Reach with bucket on ground
68.5 in
Bucket rollback angle
48 deg
Digging depth
3.5 in
Overall height in carrying position
55.2 in
Performance Rating (no load)
Raise to full height (self-leveling on)
3.6 sec
Raise to full height (self-leveling off)
3.2 sec
Lowering time self level valve (self-leveling on)
5.8 sec
Lowering time self level valve (self-leveling off)
3.5 sec
Attachment rollback time (self-leveling on)
1.9 sec
Attachment rollback time (self-leveling off)
1.9 sec
Attachment dumping time (self-leveling on)
2.2 sec
Attachment dumping time (self-leveling off)
2.2 sec
Backhoe Specifications
Digging force using bucket cylinder (approx.)
5825 lbs.
Digging force using dipperstick cylinder (approx.)
3779 lbs.
Trunnion type boom swing mechanism
Two cylinders
Operating Dimensions
Transport height
106.3 in
Stabilizer spread-transport
67.2 in
Ground clearance
12.3 in
Overall width
71.2 in
Digging depth, maximum
121.0 in
Digging depth, 2ft. Flat bottom
120.0 in
Digging depth, 8ft. Flat bottom
102.2 in
Operating height, fully raised
157.2 in
Loading height
91.3 in
Loading reach
58.7 in
Reach from swing pivot
160.9 in
Swing pivot to rear axle center line
38.0 in
Bucket rotation
180 deg
Swing arc
180 deg
Stabilizer spread-operating
89.3 in
Angle of departure per SAE J1234
19.2 deg
Leveling angle
10.0 deg
*1 11.8 GPM for loader/backhoe, 6.6 GPM for backhoe boom swing, 6.6 GPM for power steering.
*2 With round back loader bucket, 18" backhoe and standard tires.
* The specifications are taken with KUBOTA's L45 tractor. (Tire size: Front 27 x 10.50 - 15R4, Rear 15 - 19.5R4)
Additional TLB’s
0 Selected  

Posted in Equipment, TLB's