B26

B26 Tractor Loader Backhoe


The Kubota B26 TLB is built with a combination of power and durability. The 26hp diesel engine boasts a combination of high power and high torque rise. The integrated main frame is performance matched to the loader and backhoe, which creates structural integrity for added durability.
Key Features
  • 26hp Kubota liquid cooled diesel engine.
  • Slanted boom and hood design.
  • Spark arrestor muffler.
  • Ergonomically designed seat to reduce fatigue .
  • Hydraulic Independent PTO.
  • Rear 3-Point Hitch.
Specifications
B26
Engine
Gross power (SAE)
26 HP
Net power (SAE)
23.3 HP
Total displacement
68.5 cu. In
No. of cylinders
3
Rated speeds
2800 rpm
Transmission
Type
HST
No. of speeds
Forward 3, Reverse 3
Max. traveling speed
11.1 mph
Range shift lever position
Seat side, right
Hydraulic System
Pump capacity*1
11.2 gpm
3-point hitch lift capacity at 24 in. behind lift point
1676 lbs.
Position Control
Standard
Tractor Specifications
Max. PTO Power
19.5 HP
Fuel Tank Capacity
8.2 gal
Tire Size
Front
23 x 8.50 - 14R4
Rear
12.4 - 16R4
Wheelbase
62.2 in
Tread
Front
35.6 in
Rear
41.3 in
Weight with Loader, Backhoe and ROPS/FOPS*2
4001 lbs.
Min. Turning Radius (w/ brake)
8.2 ft.
Rear PTO
Live independent, 9.0 r/s
Clutch
N/A
Power Steering
Hydrostatic
Brake Type
Wet disc
3-Point Hitch (Category I)
Standard
ROPS
4-post, Standard
FOPS
Standard
Others
Loader-integrated reinforced frame
Standard
Reversible Seat
Standard
Tilt Steering
Standard
Muffler
Enclosed (w/ spark arrestor)
Cup Holder
Standard
Engine start key & Hand throttle
Seat side, right
Lights
F2, R2, Standard
Armrest
Standard
Loader Specifications
Lift capacity to max. height of bucket bottom mid point
1102 lbs.
Lift capacity to max. height at pivot pin
1300 lbs.
Breakout force at pivot pin
2344 lbs.
Control valve
One detent float position power beyond circuit
Net weight (Approx.)
628 lbs.
Auto-leveling mechanism
Mechanical spill guard
Operating Dimensions
Maximum lift height to pivot pin
94.5 in
Clearance with bucket dumped
70.0 in
Reach at maximum height
22.3 in
Maximum dump angle
45 deg
Reach with bucket on ground
61.5 in
Bucket rollback angle
46 deg
Digging depth
7.0 in
Overall height in carrying position
49.5 in
Performance Rating (no load)
Raise to full height
3.6 sec
Lowering time self level valve
2.4 sec
Attachment rollback time
3.4 sec
Attachment dumping time
1.8 sec
Backhoe Specifications
Digging force using bucket cylinder (approx.)
4211 lbs.
Digging force using dipperstick cylinder (approx.)
2123 lbs.
Trunnion type boom swing mechanism
Two cylinders
Operating Dimensions
Transport height
89.1 in
Stabilizer spread-transport
53.0 in
Ground clearance
11.3 in
Overall width
53.7 in
Digging depth, maximum
99.8 in
Digging depth, 2ft. Flat bottom
98.3 in
Digging depth, 8ft. Flat bottom
77.0 in
Operating height, fully raised
129.8 in
Loading height
77.3 in
Loading reach
52.1 in
Reach from swing pivot
133.9 in
Swing pivot to rear axle center line
33.7 in
Bucket rotation
181.2 deg
Swing arc
180 deg
Stabilizer spread-operating
83.3 in
Angle of departure per SAE J1234
20.3 deg
Leveling angle
10.7 deg
*1 7.0 GPM for loader/backhoe/3-point hitch, 4.2 GPM for backhoe boom swing, 6.2 GPM for power steering.
*2 With 60" loader quick attach bucket, 18" backhoe and standard tires.
* The specifications are taken with KUBOTA's B26 tractor. (Tire size: Front 23 x 8.50 - 14R4, Rear 12.4 - 16R4)
Additional TLB’s
0 Selected  

Posted in Equipment, TLB's