6” @ 10.5lb/ft structural channel sills, running the full deck length with six bolt on hold down assemblies.
Full 1/8” checker plate decking, 96” wide, running the full length of the bed with formed structural deck reinforcements
|Coring and Manipulator Assembly|
25” diameter rotating turret assembly with worm gear rotation and guard fastened to understructure and decking.
270 degree rotation, hydraulically operated vertical arm assembly, with horizontal storage positioning and hydraulic auto control ring hold down system.
12” to 24” diameter wet drilling core bit with 48” travel stroke using fine proportional control.
100 USG plastic water tank assembly located on the horizontal boom.
Hydraulically driven high-pressure water pump, 5.5 G.P.M. @ 1500 P.S.I. with 25 ft of 3/8” hose and high-pressure handgun.
Electric water pump, 1.3 G.P.M. @ 30 P.S.I. and includes 1/2” diameter water hose running to gland assembly on cutter drive shaft for cooling of cutter head and additional hose for cleaning and cooling outside of cutter.
Optional winterizing package.
Two rear stabilizer legs, hydraulically operated.
Power-take off installed on truch transmission.
Hydraulic load sense pump, drive line mounted to PTO with MH3 HydraPak hydraulic cooling system complete with 25 gallon hydraulic reservoir
Includes suction and return lines, sight glass, temperature gauge, fill port, drain port and oil filter.
Plug in remote pendant control with 25ft cable extension for operation of manipulator/cutter assembly and stabilizers, with boom mounted control panel and emergency shutdown switch.
2 Under-deck mounted Toolboxes (48” L x 18” H x 18” D) 1 Pendant control box, under-deck mounted on driver’s side.
Sand blasted, powder coated primer and powder coated finish coat (50% gloss black)
Traffic Cone Carrier installed on the deck Deck mounted Utility Storage Area 28 or 22 square foot (see Deck Length) Spare Drum Carrier installed on the deck Dual LED flashing amber strobe lights.
|Basic Coring Pagkage (Extra)|
One 18" diameter Pro II diamond segment coring drum with "A" flange drive adapter, one steel pilot shaft, one 2 3/8" bi-cone pilot bit, or a 2 3/8 tri-tooth carbide bit,16” diameter pavement protecting impact plate and one standard core-puller.
|Core Hoist (Optional)|
Powerful 500+ lb capacity boom-mounted core hoist (12V) that safely and easily handles the heaviest 18-inch or 24-inch diameter cores.
We offer a choice of deck length depending on whether or not you want a larger on deck storage area or a shorter overall length.
The longer unit with a 14.7-foot deck and 28-square foot on-deck storage area mounts on a cab & chassis with a 201" wheelbase and a Cab to Axel length of 120".
The shorter unit with a 13.3-foot deck and 22-square foot on-deck storage area mounts on a cab& chassis with a 189" wheelbase and a Cab to Axel length of 108". Both units are priced the same. The longer model is shown in the illustration.
|Ford Vehicle Specs|
2009 FORD F550 4x2 Chassis Cab (dual rear wheels)
Wheelbase: 201 inches or 189 inches
Cab to Axel: 120 inches or 108 inches
Rear Overhang (AF): 47.5 inches
Fuel Tanks: Mid-ship fuel tank ONLY (No Rear Tank)
|Required Vehicle Options|
6.4L V-8 Diesel Engine
Torqshift 5-speed Auto Transmission
4.88 Ratio Limited Slip Axle
Payload Plus Package Upgrade: 19500 GVWR
Transmission PTO Provision
Heavy Duty Alternator